Beskrivning
SWIT M-1093F
Dual 9-inch FHD Waveform Rack LCD Monitor.
Key features:
- 9-inch IPS LCD Panel ×2
- 1920×1200 resolution, 800:1 contrast
- 19-inch 4U rack mounting, ±30° rotatable
- 2K/3G/HD/SD-SDI, HDMI, CVBS monitoring
- 16-ch Embedded audio meters with alert
- Select any 2 audio channels to output
- Waveform Y/Cb/Cr/R/G/B and single line
- Vector scope, histogram R/G/B/Y
- AFD, H/V delay, R/G/B/Mono, False color
- TSL UMD and text TALLY display
- Zebra stripes, Peaking focus assist
- SDI timecode display
- Marker 4:3, 13:9, 14:9, 15:9, 1.85:1, 2.35:1
- TALLY light and GPI control
- USB firmware upgrade
9-inch IPS LCD panel with LED backlight
The M-1093F adopts 2× 9-inch IPS (In-Plane Switching) LCD panels, with Full HD 1920×1200 resolution and LED
backlight, 800:1 contrast.
The viewing angle is Horizontal: 170° / Vertical: 170°.
Input/Output Interfaces (Each LCD of M-1093F supports):
- 2K/3G/HD/SD-SDI input ×2
- 2K/3G/HD/SD-SDI loop output ×2
- HDMI 1.3 input ×1
- HDMI 1.3 loop output ×1
- CVBS input ×1
- CVBS loop output ×1
- 3.5mm analog audio input ×1
- 3.5mm analog audio output ×1
Video Analysis Assistant Pattern with Waveform / Vector scope / Histogram
M-1093F supports video analysis assistant patterns includes:
Waveform (Y/Pb/Pr/R/G/B), Vector scope, Histogram (R/G/B/Y), to convert the digital video quality info (Luma,
Color, Saturation, etc) to patterns, and the patterns can be switched on/off individually, select display position
(Up/Down/Left/Right), size, color, and translucence.
Embedded Audio Monitoring with up to 16-ch meters with alert and select output
M-1093F supports SDI-16ch and HDMI-8ch embedded audio meters display, with marks and audio abnormal alert info.
Users can also select any 2 channels audio to output via 3.5mm socket or speakers.
The audio meter pattern position can be selected from one of four corners, and you can select to display only 2
channels, 8 channels, and full 16 channels.
Also scale markers, alert info, and translucent of the audio meter pattern are selectable.
UMD and Text-Tally Display with TSL 3.1 / 4.0 Protocol
M-1093F supports UMD and Text-Tally display of TSL 3.1/4.0 protocol, with 1-126 TSL address selection, and Max
8 letters displayed.
The UMD/TALLY signal inputs via RJ45(RS485) port on the rear panel of the monitor.
M-1093F offers the following accessories as standard package:
- 1x 4-pin XLR power adaptor
- 2x LCD protective film